The Numismatic Bibliomania Society

PREV ARTICLE       NEXT ARTICLE       FULL ISSUE       PREV FULL ISSUE      

V20 2017 INDEX       E-SYLUM ARCHIVE

The E-Sylum: Volume 20, Number 50, December 3, 2017, Article 19

COINAGE PRESSES AND THE ENGINEER’S THUMB

Greg Ruby's Fourth Garrideb blog entry from November 23, 2017 quotes a passage from the canon related to coin manufacturing. -Editor

Towards the end of The Engineer’s Thumb, we learn that the hydraulic press that Victor Hatherley is hired to inspect and suggest a course of repair is actually being used to strike counterfeit coins. I have always been troubled by the below passage that Arthur Conan Doyle wrote for the story:

Boulton screw press engraving ‘”We are now,” said he, “actually within the hydraulic press, and it would be a particularly unpleasant thing for us if anyone were to turn it on. The ceiling of this small chamber is really the end of the descending piston, and it comes down with the force of many tons upon this metal floor. There are small lateral columns of water outside which receive the force, and which transmit and multiply it in the manner which is familiar to you. The machine goes readily enough, but there is some stiffness in the working of it and it has lost a little of its force. Perhaps you will have the goodness to look it over, and to show us how we can set it right.”

‘I took the lamp from him, and I examined the machine very thoroughly. It was indeed a gigantic one, and capable of exercising enormous pressure. When I passed outside, however, and pressed down the levers which controlled it, I knew at once by the whishing sound that there was a slight leakage, which allowed a regurgitation of water through one of the side cylinders. An examination showed that one of the india-rubber bands which was round the head of a driving- rod had shrunk so as not quite to fill the socket along which it worked. This was clearly the cause of the loss of power, and I pointed it out to my companions, who followed my remarks very carefully, and asked several practical questions as to how they should proceed to set it right. When I had made it clear to them, I returned to the main chamber of the machine, and took a good look at it to satisfy my own curiosity. It was obvious at a glance that the story of the fuller’s earth was the merest fabrication, for it would be absurd to suppose that so powerful an engine could be designed for so inadequate a purpose. The walls were of wood, but the floor consisted of a large iron trough, and when I came to examine it I could see a crust of metallic deposit all over it. I had stooped and was scraping at this to see exactly what it was, when I heard a muttered exclamation in German, and saw the cadaverous face of the Colonel looking down at me.

This seems outrageously large to me. According to the chronologists, this story takes place in 1889. Now take a look at this video of a steam powered coinage press from the Carson City mint that was functioning from 1870 – 1885 and again from 1889 until 1893.

Be sure to see the complete article online for related information including a video of a contemporary coin press in action. Can anyone answer Greg's question? Thanks. -Editor

It seems unreasonable that there would be a area large enough to fit three grown men under a piston that could crush them as the story suggests.

Do we have any engineers in our reading audience that could shed some light on this matter?

To read the complete article, see:
Coinage Presses and The Engineer’s Thumb (http://fourthgarrideb.com/2017/11/23/coinage-presses-and-the-engineers-thumb/)

DWN E-Sylum ad04


Wayne Homren, Editor

Google
 
NBS (coinbooks.org) Web

The Numismatic Bibliomania Society is a non-profit organization promoting numismatic literature. See our web site at coinbooks.org.

To submit items for publication in The E-Sylum, write to the Editor at this address: whomren@gmail.com

To subscribe go to: https://my.binhost.com/lists/listinfo/esylum

PREV ARTICLE       NEXT ARTICLE       FULL ISSUE       PREV FULL ISSUE      

V20 2017 INDEX       E-SYLUM ARCHIVE

Copyright © 1998 - 2024 The Numismatic Bibliomania Society (NBS)
All Rights Reserved.

NBS Home Page
Contact the NBS webmaster

coin