The Numismatic Bibliomania Society

PREV ARTICLE       NEXT ARTICLE       FULL ISSUE       PREV FULL ISSUE      

V26 2023 INDEX       E-SYLUM ARCHIVE

The E-Sylum: Volume 26, Number 25, June 18, 2023, Article 19

VOCABULARY TERM: MULTIPLE BLANKING

Here's another entry from Dick Johnson's Encyclopedia of Coin and Medal Terminology. I added an image of skeleton scrap from a Coin Community thread. -Editor

Multiple Blanking. The process of producing several blanks with a single stroke of the blanking press. A multiblanking head is required with a matching plate containing the same number and pattern of openings as the number and pattern of blanking punches. Such multiple blanking is highly suitable for coin blanks of thin gauge metal and small size blanks, as under one inch diameter.

The first multiple blanking had two blanking heads, and was called dual blanking. History has not recorded who developed this concept, but we do know that multiple blanking was done at the Royal Mint London by 1888. It was blanking silver shillings two at a time, and copper blanks – farthings and halfpence – five at a time.

As blanking presses developed, and became more powerful, additional blanking heads were added (with corresponding apertures in the blanking plate). The most modern multiple blanking presses can blank as many as thirty blanks with each cycle of the press. Wider strip is required and an elaborate blanking pattern is used. The advantage of multiple blanking is two fold: it lowers the cost of the blanks and slightly more blanks can be cut out of the strip (leaving as little as 30% to 35% unblanked, as skeleton scrap).

2_pfennig_scissel_strip Multiple blanking can create a number of errors from imperfect advancement of the rolled strip. Also portions of the skeleton scrap have been inadvertently struck, these mint errors are unusual shape. The most dramatic of such is the BOW TIE, struck on a piece of scissel from the metal formed between two dual blanking dies.

`Leonardo da Vinci's drawing (circa 1500) for a proposed press had, in effect, a blanking and a striking press back-to-back. Perhaps it could also do double blanking on the same strip (since these were completely separate of one another da Vinci could be credited with the concept, despite the fact there is no record this press was ever built). See blanking.

NNP Project Coordinator Len Augsburger adds:

I've seen the leftover part also referred to as webbing.

http://www.lincolncentresource.com/sitebuilder/images/header32-962x194.jpg

To read the complete Coin Community thread, see:
Is This A Piece Of Scissel? (https://www.coincommunity.com/forum/topic.asp?TOPIC_ID=248264)

To read the complete entry on the Newman Numismatic Portal, see:
Multiple Blanking (https://nnp.wustl.edu/library/dictionarydetail/516369)

Garrett Mid-American E-Sylum ad08a



Wayne Homren, Editor

Google
 
NBS (coinbooks.org) Web

The Numismatic Bibliomania Society is a non-profit organization promoting numismatic literature. See our web site at coinbooks.org.

To submit items for publication in The E-Sylum, write to the Editor at this address: whomren@gmail.com

To subscribe go to: https://my.binhost.com/lists/listinfo/esylum

PREV ARTICLE       NEXT ARTICLE       FULL ISSUE       PREV FULL ISSUE      

V26 2023 INDEX       E-SYLUM ARCHIVE

Copyright © 1998 - 2024 The Numismatic Bibliomania Society (NBS)
All Rights Reserved.

NBS Home Page
Contact the NBS webmaster
coin